Datasheet

07 | Keysight | BenchVue Software v3.0 (BV0000A) - Data Sheet
BenchVue Function Generator App
Supported functionality
– Output control
– Waveform selection
– Sine
– Square
– Ramp
– Pulse
– Arb
– Triangle
– Noise
– PRBS (pseudo-random binary sequence)
– DC
Instrument settings – Waveform: amplitude, offset, frequency, and phase
– Mode select:
– Modulation:
-– Type: AM/FM/PM/FSK/BPSK/SUM
-– Source (INT/EXT/CH2)
-– Shape (Sin/Squ/Tri/Ramp/Nramp/Noise/PRBS/Arb)
-– DSSC (double sideband suppressed carrier)
-– Depth and AM frequency settings
– Sweep:
-– Type (linear/log)
-– Frequency set: start/center and stop/span
-– Time set: sweep, hold and return
– Burst:
-– N cycle mode/gated mode, start phase, number of cycles, and period
– Output:
– Mode (normal/gated), polarity (normal/inverted) and load (discrete/Hi-Z)
– Trigger:
– Source (IMM/ext/bus/timer), delay
– Sync output
– Enable (on/off), polarity (normal/inverted), source (Ch1/Ch2) and mode (normal/carrier)
Export instrument properties to Microsoft Word
Save and recall instrument state
Supported models (17)
33210A 33220A 33250A 33521A 33522A 33509B 33510B 33511B 33512B 33519B 33520B 33521B 33522B
33611A 33612A 33621A 33622A
Pro version capabilities
Upgrading to the Pro version (Model # BV0002A) provides advanced waveform creation capabilities by
linking to Keysight Waveform Builder Pro Software from BenchVue.
Control your function generator to set waveform properties and
load custom arbitrary waveforms from les or drag-and-drop
from an oscilloscope.