ClicBot Modules - User Guide

40*40*86.6 mm
55 g
Universal joint on the bottom: 0°～180°
Horizontal knob of the main part:
-90°~90°
bottom
Diameter
Net Weight
Degrees of
Freedom
Connector
Dimension
Net Weight
47*36*14.4 mm
10g
Dimension
Net Weight
75.1*75.1*45.2 mm
61 g
Specification of Modules Specification of Modules
Base Accessory - Mount
The Mount can be used to fix your ClicBot to a table with Mount Stickers.
Reinforcement Accessory - Locker
The Locker is used to reinforce connections between two modules.
Fixation Accessory - Holder
The Holder can be used to connect a cellphone or sports camera to your
ClicBot. It uses a standard 1/4 screw.
Please use the Mount stickers provided by KEYi Tech to ensure the
product is fixed properly.
It can be used for connecting modules when additional reinforcements
are required.
1110
Connect Locker
between modules.
Rotate Locker. Rotate until
baseline is aligned
Step1 Step2 Step3