ClicBot Modules - User Guide

FAQs FAQs
How to turn on/off ClicBot?
Long press the power button on the rear side of
Brain module for 3 seconds to turn on ClicBot.
Press the power button on the rear side of Brain
module and then choose the shutdown option to
turn off ClicBot, or long press the power button
for 4 seconds to force a shutdown.
Is it a must to connect ClicBot to the internet
while playing?
No, but it needs to connect to the internet to
check for update.
Can ClicBot’s functions be updated ?
ClicBot modules can be upgraded online.
Connect Brain module to Wi-Fi, click Home button
“—” and choose “Update” to check/download the
update.
Connect other modules to Brain module to auto
start the update, follow the update instruction on
the screen to upgrade modules.
The face identification distance of Brain
module
The camera for face detection & recognition is
located in the upper-left triangle area of the
screen of Brain Module, and it can identify faces
at a distance of 1 m.
The rotation range of the screen of Brain
module
The rotation range of the screen is up to 24
degree in the horizontal direction which can be
set in ClicBot App. Please do not rotate the screen
by hand.
Diagnostics – why does the indicator light of a
module flash?
The indicator light is used for indicating the
status of a module, mainly including:
Solid light - Operation
Breathing – Readiness
Flashing – Waiting for being connected to a
module
Fast flashing – Connection error
Programming language applicable to ClicBot
Support graphic programming based on Google
Blockly.
Editable modules applicable to ClicBot
Support over 20 editable modules, including the
screen of Brain module, loudspeaker, the motor
of Joint module, the motor of Wheel module, and
the color of the strip lights of Skeleton module.
How to assemble a ClicBot Robot?
ClicBot is installed with a smart assembling
guidance system. After choosing which robot is
to be assembled, there will be a step-by-step
instruction shown on the screen of Brain Module.
The indicator light will flash to indicate where
to be connected. The system will automatically
check whether all the modules have been
assembled correctly and show alert message
on the screen in case of any error while the
indicator light is fast flashing. And the system will
automatically adjust the angle of connection as
long as the two modules are correctly assembled.
The motion detection distance of Brain
module
The camera for motion detection is located in
the upper-left triangle are of the screen of Brain
Module, and it can detect the movement at a
distance between 1 and 5 m.
The role of the camera of Brain module
Brain module is equipped with a 1.2-megapixel
camera which is capable for controlling the
robot from the first-person point of view, face
detection & recognition and motion detection.
The identification distance of gestures like
shielding, waving and etc.
The gesture sensor is located in the upper-left
triangle area of the screen of Brain module.
Please keep your hand at a distance of 5-20 cm
when shielding and waving, etc.
The detection distance range of Brain module
The gesture sensor is located in the upper-left
triangle area of the screen of Brain Module, and
it can detect the obstacle at a distance between 5
and 20 cm in front of robots.
Is it a must to control ClicBot Robot with
ClicBot App?
No, it can be controlled manually with the screen
of Brain module.
The maximum distance of remote control with
ClicBot App
It depends on how to connect the robot to ClickBot
App:
·Via router, it is up to 10m which may be different
due to the performance of router.
·Via hotspot, it is up to 5m.
Diagnostics - Auto Shutdown
To maintain the battery and motor performance,
ClicBot will be shut down automatically in the
following situation:
1. It hasn’t been operated over 20 minutes;
2. Battery power is lower than 10%.
How long does ClicBot take a full charge and
how long can it be used continuously ?
It takes 2.5 hours at 5V/2A to have it fully charged,
and it can be used continuously up to 4 hours.
2524