Manual

KEYENCE CORPORATION. Vision System Division

‐ 13 ‐ www.keyence.com

Select "Settings" ⇒ "Target FTP Server Settings" from the return flow editing screen in run mode.

In general the settings can be left as they are, but make sure that the Server Port No. is 21.

There is no "High Speed Mode" option

for the XG‐7000 Series.

For the XG‐8000 Series, turn the "High

Speed Mode" on as necessary.

[Important] Do not change the Server

Port No. from 00021 unless absolutely

necessary.

For Reference: About the FTP High Speed Mode

When "High Speed Mode" is on, data can be output from the FTP even faster. As a

result, output from things other than the FTP may become slow, and it may take longer

for the display to refresh.