Owner's manual

7
E SR-750-IM
General Specifications
*1 Barcodes fitted into the visual field range in size can be read.
*2 The laser classification for FDA(CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.
*3 To comply with CSA No.61010-1/UL61010-1/IEC61010-1, use the following power supply.
- one that provides Class 2 output as defined in the CEC and NEC, or
- one that has been evaluated as a Limited Power Source as defined in CAN/CSA-C22.2 No.60950-1/UL60950-1/IEC60950-1.
*4 Peak operating current for PoE Power Class 2: 210mA maximum.
Model SR-750HA SR-750 SR-751 SR-752 SR-752+SR-75L4 SR-752+SR-75L6
Type High resolution Close-range Mid-range Long-range 400 mm 600 mm
Receiver
Sensor CMOS Image Sensor
Number of pixels 752×480 pixels
Lighting Light source Red LED
Laser pointer
Light source Visible semiconductor laser, Wavelength 660 nm
Output 60 μW
Pulse duration 200 μs
Laser class Class 1 Laser Product (IEC60825-1, FDA(CDRH) Part 1040.10
*2
)
Reading specifications
Supported symbol
2D QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF, Composite Code (CC-A, CC-B, CC-C)
Barcode
*1
GS1Databar, CODE39, ITF, NW-7 (Codabar), CODE128, GS1-128, JAN/EAN/UPC,
CODE39 FullASCII, CODE93, 2of5 (Industrial 2of5), COOP 2of5, Trioptic CODE39
Minimum resolution
2D 0.082 mm 0.127 mm 0.19 mm 0.19 mm 0.33 mm 0.5 mm
Barcode - 0.127 mm 0.127 mm 0.17 mm 0.22 mm 0.33 mm
Reading distance
(typical examples)
DataMatrix
QR
22 to 50 mm
(Cell size=
0.25 mm)
40 to 80 mm
(Cell size=
0.25 mm)
45 to 165 mm
(Cell size=
0.5 mm)
180 to 305 mm
(Cell size=
0.5 mm)
300 to 490 mm
(Cell size=
0.5 mm)
460 to 690 mm
(Cell size=
0.5 mm)
Barcode -
30 to 100 mm
(Narrow bar width
= 0.33 mm)
45 to 195 mm
(Narrow bar width
= 0.5 mm)
180 to 330 mm
(Narrow bar width
= 0.5 mm)
250 to 540 mm
(Narrow bar width
= 0.5 mm)
400 to 760 mm
(Narrow bar width
= 0.5 mm)
Focal distance 38 mm 60 mm 100 mm 250 mm 400 mm 600 mm
Reading view range
(focal distance)
26.6 mm×
17.0 mm
42.5 mm×
27.1 mm
70.6 mm×
45.0 mm
65.0 mm×
41.5 mm
108 mm×
69 mm
165 mm×
106 mm
I/O specifications
Control input
Points 2
Input type Bidirectional voltage input
Maximum rating 26.4 VDC
Minimum ON voltage 15 VDC
Maximum OFF current 0.2 mA or less
Control output
Points 3
Output type Photo MOS relay output
Maximum rating 30 VDC
Maximum load current 1 output: 50 mA or less, 3 Total output 100 mA or less
Leakage current when
OFF
0.1 mA or less
Residual voltage when
ON
1 V or less
Ethernet
Communication standard 10BASE-T/100BASE-TX
Supported protocol TCP/IP, EtherNet/IP, FTP, BOOTP, PROFINET, MC Protocol, KVSTUDIO, SNTP
Serial communication
Communication standard RS-232C compliant
Transmission speed 9600, 19200, 38400, 57600, 115200 bps
Synchronization method Asynchronous
Supported protocol Non-procedure, MC Protocol, SYSWAY, KVSTUDIO
Environmental
resistance
Enclosure rating IP65
Ambient temperature 0 to 45°C
Ambient storage temperature -10 to +50°C
Relative humidity 35 to 95% RH (No condensation)
Storage ambient humidity 35 to 95% RH (No condensation)
Ambient luminance Sunlight: 10000lx, Incandescent lamp: 6000lx, Fluorescent lamp: 2000lx
Operating environment No dust or corrosive gas present
Vibration
10 to 55 Hz Double amplitude 1.5 mm/55 to 500 Hz: Acceleration 5G,
3 hours each in X, Y and Z directions
Rating
Power voltage
*3
Control port: 24 V DC ±10% or
Ethernet port: PoE TypeA/B 36 to 57 V (Cannot supply at the same time)
Current consumption
Control port: 220mA or less (When 24 VDC power supply is used)
Ethernet port: PoE Power Class 2
*4
Weight Approx. 160 g Approx. 175 g Approx. 185 g