User Manual

Chapter 2 Functions
2-5
2
ENGLISH
2-11 Mode Switch Settings
T R
POWER
FSD-ON
FSD-OFF
INTERLOCK
LOCKOUT
RESTART
TEST
MPCE
E-STOP1
E-STOP2
CAUTION
Electric shock
Mode switch
See Instruction Manual.
MODE SWITCH
MPCE
MONITOR
START
INTERLOCK
RESTART
INTERLOCK
1,5
2,6
3,7
4,8
ON
12345678
Mode switch function and setting states
No. Mode Name When Enabled * When Disabled At Factory Shipment
1 MPCE monitor ON OFF OFF
2 Start interlock ON OFF OFF
3 Restart interlock ON OFF OFF
4 Not used
–––
5 MPCE monitor ON OFF OFF
6 Start interlock ON OFF OFF
7 Restart interlock ON OFF OFF
8 Not used
–––
(*) Both mode switches in the pair must be on.
Ex: The No.1 and No.5 mode switches are on when the MPCE monitor is enabled.
Mode switch setting method
1. Turn off the SL-R11 power.
2. Use a screwdriver to remove the switch cover screws, and then open the switch cover.
Mode switch setting 1 Mode switch setting 2
1
Loosen screw
2
Open lid