96063E Sensor Amplifier Communication Manual Read this manual before use. Keep this manual in a safe place for future reference.
About This Manual This manual contains information about communicating data by connecting either of the network units listed below and sensor amplifiers. Compatible network units CC-Link compatible network unit, NU-CL1 DeviceNet compatible network unit, NU-DN1 For specific communication procedures, refer to the manual of each network unit. For the functions of sensor amplifiers, refer to the manual of each sensor amplifier.
1 FS-N Series Number of ID Numbers Occupied The table below summarizes how many ID numbers are occupied by each model of sensor amplifier. Model Number of ID numbers occupied FS-N10 FS-N12* FS-N14* 1 1 2 Connection example: ID number FS-N14* 3 FS-N12* 2 4 1 FS-N10 CH1 CH2 Network unit Data Assignments Each ID number is assigned an output, setting value, current value, and external input.
1 FS-N Series For the FS-N series, the data parameters that can be communicated via a network unit are specified as follows: Parameter Current Value Setting Value Current Value Property Sensor Error Sensor Warning Key Lock Product Code Head Code L-on/D-on (N.O./N.C.
1 FS-N Series Functions That Cannot Be Set in Duplicate There are functions that cannot be set (used) in duplicate. When such functions are set through communication, the function of lower priority is invalidated while remaining in the set state or is deactivated. The following table summarizes the functions that cannot be set in duplicated, and their operations.
1 FS-N Series Parameter List nn: ID number of sensor amplifier Example: If the ID number is 13, then: nn30h->1330h, and (nn x 10+3)d->133d R: Write; W: Read; C: Motion command InstID: Instance ID; AttrID: Attribute ID CC-Link Data Data no.
1 FS-N Series CC-Link Data Data no.
1 FS-N Series CC-Link Data Data No. category (Hex) (Hex) DeviceNet InstID nn71 Name AttrID (Hex) 75 [Custom] Key Lock Status Attribute Data type Initial value R/W INT 0 0: Unlock 1: Key Lock 2: PIN Code Lock 3: Communication Lock nn72 76 [Custom] PIN Code R/W INT 0 0 - 9999 nn73 77 [Custom] Slide Switch Lock R/W INT 0 0: Unlock 1: Lock nn74 78 [Custom] L-on/D-on (N.O./N.C.
1 FS-N Series CC-Link Data category (Hex) Data No.
1 FS-N Series CC-Link Data Data No.
1 FS-N Series CC-Link Data Data No.
1 FS-N Series TAG String Code Table When strings are stored in the "TAG Strings" parameters, the "Sub Display" parameter can be set to "TAG Strings" so that the amplifier displays the strings contained in the "TAG Strings" parameters.
1 FS-N Series Revision History Print date Revision no. Description January, 2010 Initial release. February, 2010 Second release.
WARRANTIES AND DISCLAIMERS (1) KEYENCE warrants the Products to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment. If any models or samples were shown to Buyer, such models or samples were used merely to illustrate the general type and quality of the Products and not to represent that the Products would necessarily conform to said models or samples.
Copyright (c) 2010 KEYENCE CORPORATION. All rights reserved.
