Instruction Manual

2-16
Installation
2
2-4 NX-50RS Connections and Wiring
The wiring for the NX-50RS is as follows.
 Electrical wiring
 Power terminal
If using a crimp contact, use a device of the following dimensions.
 Electrical wiring
Connect a 24 V DC power source to the power terminal, as shown in the figure.
• Use a class 2 output power source for 24 V power.
• Use a D type ground pin (ground resistance no more than 100 ).
Terminal Dimensions
Round terminal a:8.0 mm Max
Y terminal a:6.0mm Max
Item Contents
Wire size AWG14-20
Clamping torque 0.51 N
·m (4.5 lbf·in)
Wire material Copper
Wire type Strand wire
Electrical
temperature rating
+60
°C
Power supply
24 V DC ±10%
24 V DC 0 V
Twist
Protective
grounding
Caution