Owner's manual
Table Of Contents
- N-400 User's Manual
- Software License Agreement
- Safety Precautions
- Warnings and Cautions Specific to the N-400
- List of Package Contents
- Contents
- Chapter 1 Overview of the N-400
- Chapter 2 Installation Procedure
- Chapter 3 N-400 Setup Procedure
- Chapter 4 Multi-Drop Link Mode Control Procedure
- Chapter 5 Multi-Head Mode Control Procedure
- Chapter 6 PLC Link
- Appendices
- WARRANTIES AND DISCLAIMERS:
Appendices
120
Appendices
Appendix A Specifications
N-400
Model N-400
Connectable bar code reader BL-700 series, BL-500 series, BL-180 series
Rated input 15 to 26 VDC, 10 mA max.
Max. OFF current 1.0 mA
RS-232C Applied standards EIA, RS-232C standards
Synchronization Start-stop (full-duplex)
Transmission code ASCII code
Baud rate 600/1200/2400/4800/9600/19200/31250/38400bps
Data length 7 or 8 bits
Parity check Even/Odd/None
Stop bit length 1 or 2 bits
RS-485 Applied standards EIA, RS-485 standards
Synchronization Start-stop (full-duplex)
Transmission code ASCII code
Baud rate 600/1200/2400/4800/9600/19200/31250/38400 bps
Data length 7 or 8 bits
Parity check Even/Odd/None
Stop bit length 1 or 2 bits
Max. number of 31
connectable units
Max. total 1.2 km
extension distance
Ambient temperature 0 to 50°C (32 to 122°F), No freezing
Relative humidity 35 to 85%, No condensation
Ambient atmosphere No dust or corrosive gas
Vibration resistance 10 to 55 Hz, 1.5 mm double amplitude in
X, Y and Z directions, respectively
Power supply voltage 24 VDC +10%/-20%
Current consumption 140 mA max.
Weight Approx. 180 g
Trigger
input