User Manual

4-1 List of Settings

Settings for Advanced Functions

4-3

- Digital Laser Sensor LV-N10 Series User's Manual -

 2-Output ( )

*14

…(page 4-33)

*1 hsp cannot be selected when LV-S31/S62/S63 is connected.

*2 You can press the button to set between the range of -99P and 99P.

*3 Press the button to set between the range of 1 and 9999 (ms).

*4 Press the button to set the adjustment sensitivity to a range of between LEu1 and LEu3 and set the warning output level to a range of

between 0P and 100P.

*5 Cannot be selected when LV-S31 is connected.

*6 Press the button to switch between oFF/on/KEEP.

*7 The analog output upper limit can be set between 50 and 65535.

*8 Not available for zero line types.

*9 Monitor output type only (LV-N11MN).

*10 Press the button to toggle between Std/P~P_/b~b_/P_b~/P~b_.

*11 Press the button to set between the range of 100P and 200P.

*12 Not displayed when LV-S31 is connected.

*13 Main unit only.

*14 Only 2-output types (LV-N11 / N12).

*15 Press the button to select the User (user reset) or Auto (auto reset) resetting methods.

*16 Select the count method from oUr1, oUr2 or Auto. When Auto is selected, the one shot time can be set between 1 and 9999 (ms).

• Press the button and the button simultaneously to return to the

previous setting option.

• When the button is held down, the settings menu will end and the

received light intensity setting screen will appear.

Counter output mode *

Light intensity detection mode

Limit setting output mode *

Warning output mode

Timer OFF

Off-delay timer *

On-delay timer *

One-shot timer *

Settings complete

Return to normal display

…(page 4-37)

…(page 4-34)

…(page 4-35)

…(page 4-37)

MODE

Reference

MODE