User Manual

6-5 Index
6-15
- Digital Laser Sensor LV-N10 Series User's Manual -
 2-Output ( )
*14
…(page 4-33)
*1 hsp cannot be selected when LV-S31/S62/S63 is connected.
*2 You can press the button to set between the range of -99P and 99P.
*3 Press the button to set between the range of 1 and 9999 (ms).
*4 Press the button to set the adjustment sensitivity to a range of between LEu1 and LEu3 and set the warning output level to a range of
between 0P and 100P.
*5 Cannot be selected when LV-S31 is connected.
*6 Press the button to switch between oFF/on/KEEP.
*7 The analog output upper limit can be set between 50 and 65535.
*8 Not available for zero line types.
*9 Monitor output type only (LV-N11MN).
*10 Press the button to toggle between Std/P~P_/b~b_/P_b~/P~b_.
*11 Press the button to set between the range of 100P and 200P.
*12 Not displayed when LV-S31 is connected.
*13 Main unit only.
*14 Only 2-output types (LV-N11 / N12).
*15 Press the button to select the User (user reset) or Auto (auto reset) resetting methods.
*16 Select the count method from oUr1, oUr2 or Auto. When Auto is selected, the one shot time can be set between 1 and 9999 (ms).
Counter output mode *
16
Light intensity detection mode
Limit setting output mode *
15
Warning output mode
Timer OFF
Off-delay timer *
3
On-delay timer *
3
One-shot timer *
3
Settings complete
Return to normal display
…(page 4-37)
…(page 4-34)
…(page 4-35)
…(page 4-35)
…(page 4-37)
…(page 4-37)
…(page 4-37)
…(page 4-37)
MODE
MODE
MODE
MODE
MODE
MODE
MODE
Setting Item List
List of Settings