Owner manual

5
5-9
LS-Navigator-M-NO5-E
5-5 Sending, Receiving, and Initializing Settings
When the communication is complete, the
[Parameter update results] window appears and
the received parameters are displayed.
4
Click on the [Close] button to complete the
process.
This section describes how to initialize setting parameters read by LS-Navigator.
1
Click on the [Initialize parameters] button
in the parameter settings area.
A message appears to confirm that all of the
parameters will be initialized.
2
Click on the [OK] button to initialize all of
the setting parameters on the LS-
Navigator .
Reference
The setting parameters on the controller are not
initialized. Send the settings to initialize the setting
parameters on the controller.
Initializing setting parameters
4
1
2