Owner manual

5
LS-Navigator-M-NO5-E
5-2
5-1 Setting and Changing the Connection
This section describes how to set and change the controller connected to the computer.
1
Select [Change connection] from the
[Settings] menu.
A message appears to confirm changing the
model.
2
Click on the [OK] button.
The [Model selection] dialog appears.
3
Select the model to set.
For this example, select LS-7600/LS-7500 series.
4
Click on the [OK] button.
The connected model is changed and
[Connection] in the tool bar changes to [LS-7600/
LS-7500 Series].
Example of the [Connection] display
Setting and changing the connected controller
1
2
43