Owner manual

LS-Navigator-M-NO4-E

4-4

4-2 Basic Procedures for Operation

Select the model of the controller

connected to the computer from the

following options.

LS-7000 Series, LS-7600/LS-7500 Series

Note

The model of the controller connected to the

computer must be the same as the model selected in

this window on LS-Navigator.

Select the method for reading the setting

contents from the following options.

Read controller settings, Read from file, Start

with defaults

■ When [Read controller settings] is

selected

After the [Communicating...] message appears,

the [Parameter update results] message is

displayed. Click on the [OK] button to display the

main window.

Note

When selecting [Read controller settings], click on

the [Communication Settings] button and change the

values in the [Communication settings] dialog so that

the values for the RS-232C communication

conditions on the software are the same as on the

controller. Click on the [Comm check] button to check

whether the RS-232C communication conditions are

the same on the controller and the computer.

For more details, see “Setting RS-232C

Communicatio

n Conditions” (Pa ge 5-12) in this

manual.

■ When [Read from file] is selected

The [Open] dialog appears. Select the file to load

and click on the [Open] button to display the

main window.

For more details, see “Reading setting files”

(Page 5-3).

■ When [Start with defaults] is selected

The [Select the settings to display at startup]

window disappears and the main window is

displayed.