Instruction Manual

E LS-9006D/LS-9030D
3
Using the Display Panel Support
The following describes how to mount the display panel support (OP-87757)
to the casing.
■ Common to LS-9006D/LS-9030D
1 Mount the display panel support to the display panel (LS-D1000) using
the provided bolts (M4 x L10).
Maximum tightening torque for securing the unit: 0.75 N・m
2 Mount the display panel support to the casing using the provided
bolts (M5 x L12).
The panel support can be mounted on either side of the casing.
Specifications
*1 A ± 2σ margin of error when measuring the outer diameter of φ1.0 mm round
bars in the center of the measurement area with the average measurement
number set as 2048 times.
*2 A ± 2
σ margin of error when measuring the outer diameter of φ10 mm round
bars in the center of the measurement area with the average measurement
number set as 2048 times.
*3 Margin of error when a moving
φ1.0 mm round bar is measured in the
measurement area.
*4 Margin of error when a moving
φ10 mm round bar is measured in the
measurement area.
*5 The sampling frequency will vary according to the number of OUTs that have
been
set and the use of the mutual interference prevention function.
zAir purge unit
zTarget holder pulley
zDisplay panel support
Model LS-9006D LS-9030D
Measurement target
φ0.04 mm ∼ φ6 mm φ0.3 mm ∼ φ30 mm
Minimum object sensitivity 0.04 mm 0.3 mm
Repeatability
±0.03
μm*
1
±0.1 μm*
2
Measurement position
accuracy
±0.5
μm*
3
±2 μm*
4
Sampling frequency*
5
16000 times/sec
Light source InGaN green LED
Monitor function Unavailable
Environment
resistance
Operating
ambient
temperature
0 to + 50ºC
Operating
a
mbient
humidity
20 to 85% RH
(N
o condensation)
Ambient
l
uminance
Incandescent lamp/Fluorescent lamp:
3000 lx or less
Vibration
r
esistance
10 to 55 Hz, double amplitude 1.5 mm;
2 hrs in X, Y and Z directions
Impact
r
esistance
15 G/6 ms
Sensor head protection
st
ructure
IP67 (including the connector part)
Material Aluminum
Weight Approx. 4.8 kg Approx. 9 kg
Model OP-87751
OP-87752
Material Aluminum
Weight Approx. 1500 g
Approx. 400 g
Model OP-87749
OP-87750
Material Aluminum (Main unit), SUS (Pulley part)
Weight Approx. 300 g
Model OP-87757
No. of mountable display panels 1
Material Steel
Weight
Approx. 250
ｇ