User guide

2-14
2
2 Screen Functions and Operation
 Setting scaling from measurement data.
1
Touch "Change" in the "Scaling Setting" area on the "Tolerance/Scaling"
screen.
The "Scaling Setting" dialog box appears.
2
Touch "Set from Meas data".
A confirmation dialog box appears.
3
Touch "YES".
The "Set measured value" dialog box appears.
4
At the reference surface, touch "Set" for "Input1".
This sets the measurement data of the reference surface into "Input1".
5
Insert the master work piece, then touch "Set" for "Input2".
This sets the measurement data of the master work piece into "Input2".
6
Set the scaling display values in "Display1" and "Display2".
7
Touch "OK".