User guide

3
Safety Precautions
General Cautions
•At startup and during operation, be sure to monitor the functions and performance of this
product.
• It is recommended that you take substantial safety measures to avoid any damage in
case of product failure.
• Do not modify this product or use it in any way other than as described in the
specifications. The warranty will be voided in such cases.
• When this product is used in combination with other devices, functions and performance
may be degraded depending on the operating conditions and surrounding environment.
•Do not subject this device or any peripheral equipment to sudden temperature changes.
Doing so can cause condensation and damage the equipment.
• To prevent noise-induced operation or failures, route all cabling away from high voltage
and power lines.
• The LCD panel may have black or bright specks or uneven brightness, and may exhibit
crosstalk (lines or patterns non-existent in the actual image).
Image retention may become noticeable if the same image is displayed over a prolonged
period. This is a feature of LCD screens.
CAUTION
• Do not press the touch panel (touch switch) with a sharp object such as a pen or
screwdriver. Doing so can scratch or damage the touch panel (touch switch).
• Do not apply shock or press the touch panel (touch switch) stronger than necessary.
Doing so may damage the touch panel (touch switch).
• Do not wipe the LCD with paint thinner or organic solvents as doing so may damage it.
Wipe with a mild detergent diluted with water.
96M12875