Owner manual

3-17
LK-H1W-M-NO3-E
3 Operations and Functions of Software
3
Common Settings
Functions and screen of the Common Settings tab are described below.
Click the [Common Settings] tab of the Setting window.
1. Sampling cycle
Set the sampling cycle of measurements.
2. Mutual interference prevention
This function is used to prevent mutual interference between two heads when the two
heads are connected to the same controller.
3. Timing synchronization
This function is used whether to synchronize the timin inputs of OUT1 and OUT2, or not to
synchronize them.
1
2
3
4
5
6
7