Manual

3-11
3
3 Connecting to DeviceNet
m (1 to 12): corresponds to the OUT number. m = 1 for OUT01, m = 2 for OUT02, etc.
Read
control
buffer
 Bit (16*m+3) OUTm_TIM_ON_REQ • Requests timing ON to OUTm at the
rising edge from OFF (0)  ON (1).
• Ends the request at the falling edge from
ON (1)  OFF (0).
Bit (16*m+4)  System reserved
Bit (16*m+5) OUTm_TIM_OFF_REQ • Requests timing OFF to OUTm at the
rising edge from OFF (0)  ON (1).
• Ends the request at the falling edge from
ON (1)  OFF (0).
Bit (16*m+6)  System reserved
Bit (16*m+7)  System reserved
Bit (16*m+8) OUTm_ZERO_ON_REQ • Requests zero ON to OUTm at the rising
edge from OFF (0)  ON (1).
• Ends the request at the falling edge from
ON (1)  OFF (0).
Bit (16*m+9)  System reserved
Bit (16*m+10) OUTm_ZERO_OFF_REQ • Requests zero OFF to OUTm at the rising
edge from OFF (0)  ON (1).
• Ends the request at the falling edge from
ON (1)  OFF (0).
Bit (16*m+11)  System reserved
Bit (16*m+12)  System reserved
Bit (16*m+13) OUTm_RESET_REQ • Requests reset to OUTm at the rising
edge from OFF (0)  ON (1).
• Ends the request at the falling edge from
ON (1)  OFF (0).
Bit (16*m+14)  System reserved
Bit (16*m+15)  System reserved
LK-
DN100
Signal
direction
DeviceNet master node
Offset Signal name Explanation