Manual

3-7
3
3 Connecting to DeviceNet
Changing the DeviceNet Communication
Unit Settings
This section explains the principle and operation of the DeviceNet controller (LK-DN100).
This manual describes only those functions and settings of the DeviceNet master device necessary for
communicating with the LK-DN100. Refer to the manual supplied with the master device for details on
functions and settings between the DeviceNet master device and a PLC.
Field network connection specifications
Slave attributes
 Notes on device profiles (attribute files for DeviceNet)
The table below shows the contents of the device profile.
General data Vendor name KEYENCE Corporation
Vendor ID 367
Device profile name Generic
Profile No. 0
Product catalog number 3000
Product revision 1.1
Physical conformance data Maximum network power
consumption
-
Connector type Open-ended screw connector
Physical layer insulation support Yes
Support LED Module, Network
MAC ID setting Node Address switch
Default MAC ID 63
Transmission baud rate setting Data Rate switch
Support transmission rate 125 kbps, 250 kbps, 500 kbps
Communication data Predefined Master/Slave Group 2-only server
Connection Set support
UCMM and message group
support
N/A
Message splitting support for
sending
Compatible
NOTE