User guide

59LJ-V7000_COM_RM_E
9.2.9.13 Batch profile storage data storage order and specific example
Stored profile data and measurement values can be acquired using GetStorageBatchProfile The
acquired data has the following structure. The acquired data has the following structure when there
is 1 byte per row.
The structure of 1 piece of batch profile storage data
* The tolerance judgment result of internal measurement values is always 0.
0
Profile data
Header䇭LJV7IF_PROFILE_HEADER
1
䌾
22
23
24 When 800 profiles
䌾
3223
3224
Footer LJV7IF_PROFILE_FOOTER
3225
3226
3227
3228 Measurement results (OUT1) Measurement value information BYTE
3229 LJV7IF_MEASURE_DATA Tolerance judgment result BYTE
3230 reserve BYTE
3231 reserve BYTE
3232 Measurement value
3233
3234
3235
䌾
3348 Measurement results (OUT16) Measurement value information BYTE
3349 LJV7IF_MEASURE_DATA Tolerance judgment result BYTE
3350 reserve BYTE
3351 reserve BYTE
3352 Measurement value
3353
3354
3355
FLOAT
FLOAT
* Refer to "Profile data amount calculation method" for the number of profiles.
The number changes according to the settings. Unsigned 32 bit data
䌾
Internal
measurement value
(Example:
Measurements for
the profile.
Measurements taken
immediately before
measuring mode
processing)