Instruction Manual

16
SPECIFICATIONS: LB-72(W)
Model Sensor head LB-12(W)
Controller LB-72(W)
Reference distance
1.
40 mm
Measuring range ±10 mm
Light source Invisible infrared semiconductor laser,
Output: 3.0 mW (FDA), 1.0 mW (IEC), Pulse duration: 15 µs
Wavelength 780 nm
Laser FDA(CDRH) 21CFR Part 1040.10 Class IIIb
Class IEC60825-1 Class 1
Spot diameter
2.
1.0 mm
Linearity
3.
1.0% of F.S.
Resolution
4.
2 µm (at 60 ms)/15 µm (at 2 ms)/50 µm (at 0.15 ms)
STABILITY indicator LED (RED, GREEN, YELLOW)
Output Analog Voltage
5.
-4 V to +4 V (0.4 V/mm)
Impedance 100Ω
Alarm NPN open- collector: 50 mA (40 V) max. Residual voltage: 1 V max. (N.C.)
Zero-point adjustment range 30 mm to 50 mm
Span adjustment range 0.4 V/mm±30%
Response frequency DC to 3 kHz (at 0.15 ms) (-3 dB)/
DC to 200 Hz (at 2 ms)(-3 dB)/DC to 6 Hz (at 60 ms)(-3 dB)
Sensitivity WHITE, BLACK, and AUTO (switch-selectable)
Temperature fluctuation
3.
Sensor head 0.04% of F.S./°C
Controller 0.03% of F.S./°C
Laser control input NPN open-collector or non-voltage contact
Ambient light
6.
4,000 lux. Max.
Ambient temperature 0 to +50°C (32 to 122°F), No condensation
Relative humidity 35 to 85%, No condensation
Power supply 12 to 24 VDC±10% ripple (p-p): 10% max.
Power consumption 120 mA max.
Housing Sensor head Die-cast zinc-based alloy
Controller Polycarbonate
Weight (including cable) Sensor head Approx. 270 g
Controller Approx. 200 g
1. Distance from the surface of the laser-
emitting portion of the sensor head.
2. The beam spot is visible when the
object (white paper) is placed at a
distance of 40 mm from the laser-
emitting portion of the sensor head.
3. F.S. Stands for a measuring range of 20
mm.
4. The value when the object (white paper)
is measured distance of 40 mm from
the laser-emitting portion of the sensor
head.
5. The range can be expanded to “-5 V to
5 V” by using the 0-ADJ and SPAN
adjuster trimmers. The alarm output is
approx. 7 .V.
6. Incandescent lamp or fluorescent lamp