Manual
2. Overview and Operation
2
27
*3
*4
1DEFECTIVE: 10PCS
PRODUCED: 456
PRESET: 1000
RLY 00010 ON
1DEFECTIVE: 10PCS
PRODUCED: 456
PRESET: 1000
RLY 00010 ON
1DEFECTIVE: PCS
PRODUCED: 456
PRESET: 1000
RLY 00010 ON
1DEFECTIVE: 10PCS
PRODUCED: 456
PRESET: 1000
RLY 00010 ON
1DEFECTIVE: 10PCS
PRODUCED: 456
PRESET: 1000
RLY 00010 ON
1DEFECTIVE: 01010PCS
PRODUCED: 456
PRESET: 1000
RLY 00010 ON
1DEFECTIVE: 9010PCS
PRODUCED: 456
PRESET: 1000
RLY 00010 ON
*1. Select the page of the device to change its value and enter the change mode. (The line flashes.)
*2. A line does not flash if it is set to disable the value change by the device attribute display setting. If
all lines are set to disable the value change, no line flashes.
➮
Refer to "Device attribute display setting" on page 30.
*3. The value section of the device flashes. (The zero suppression is canceled. The leftmost digit
flashes.)
*4. Confirm the new value.
Canceled when
is pressed
or when no key is pressed
for 25 seconds.
• Press the key to move through digits.
• Press the s or t key to increment/decrement a value.
• Digits do not shift automatically.
x
1.5
sec.
kv_d20_manual.p65 08.3.10, 6:08 PM27