User guide

A-42
- IV Series User's Manual (Monitor) -
A
Index
Index
Numerics
1. Image Optimization....................................... A-14
1. Image Optimization (Clearly Image a Target) ....4-6
2. Master Registration ...................................... A-15
2. Master Registration (Registering
an Image as a Reference for Judgment) ...........4-20
3. Tool Settings ................................................. A-15
3. Tool Settings
(Setting the Judgment Method for Targets) .......4-28
4. Output Assignment ....................................... A-18
4. Output Assignment
(Setting Details of Outputting to Output Line) ....4-60
A
Achieving adequate image brightness...............5-33
If the brightness cannot be adjusted due to
uneven brightness .......................................5-33
If the brightness cannot be adjusted in
the Auto Brightness Adjustment ...................5-33
Achieving good focus ........................................5-34
If good focus cannot be achieved by
the Auto Focus Adjustment ..........................5-34
Adding a tool......................................................4-31
Adding/Editing/Deleting a tool ...........................4-31
Adjusting the color tint (for color type only) .......5-36
Adjusting the installed distance (WD) ................5-32
Adjusting Thresholds for Judgment ...................5-14
Advanced Brightness Adjustment ......................4-18
Advanced Color Extraction/
Advanced Brightness Extraction........................4-49
Advanced Network Settings ..............................6-32
Attaching the protection sheet .......................... A-41
Auto Brightness Adjustment ..............................4-11
Auto Focus Adjustment Position
(auto focus type only) ........................................6-42
B
Backing up in a batch ........................................6-19
Backlight ............................................................6-52
Basic adjustments .......................... 5-37, 5-38, 5-39
Basic congurations of IV Series .........................1-2
Basic Operation Flow ..........................................3-4
Basic Operation for the Monitor .........................3-14
Basic Operation of the Settings Navigator...........4-3
Bracket ........................................................ 1-9, 8-9
Brightness correction .........................................4-26
C
Cables ...............................................................2-12
Cancelling One-Shot output ................................7-6
Capturing the monitor screen and
saving to the USB memory ................................6-23
Capturing the screen .........................................6-23
Changeover for a Target (Program Functions) ....6-8
Changing Over ....................................................7-7
Changing the logging conditions of
the image history ...............................................6-17
Changing the timing of the status output .............7-6
Checking errors by observing
the PWR/ERR indicator light of the sensor....... A-22
Checking the Package Contents .........................1-8
Checking the view and installed distance ............2-2
Clearing Errors ..................................................7-10
Clearing the saved images ................................6-16
Color Area/Area tool ..........................................4-40
Color Filters (color type only).............................4-19
Communication Cable .......................................1-12
Conrming error messages of the monitor ....... A-24
Conrming or deleting
the images registered for the Tool Auto Tuning ...5-25
Conrming/Setting the IP address of
the monitor........................................................ A-36
Conrming/Setting the IP address of
the sensor ......................................................... A-37
Conrming the existence of
the sensor from the monitor.............................. A-35
If the displayed conrmation result is “NG” ... A-35
Conrming the router settings .......................... A-37
Conrming the status by
observing the indicator light of the sensor ........ A-32
Conrming the status by observing
the SENSOR indicator light of the monitor ....... A-34
Connecting directly ............................................2-16
Connecting method after initialization............... A-40
For direct connection .................................. A-40
For network connection .............................. A-40
Connecting the monitor and multiple sensors .....1-3
Connecting the monitor and single sensor ..........1-2
Connecting the monitor cable/Ethernet cable....2-17
Connecting the power cable of the monitor .......2-15
Connecting the power I/O cable of the sensor ...2-12
Connecting the sensor and monitor...................2-16
Connecting via network .....................................2-16
Connection Cable ..............................................8-13
Controlling Timing of Judgment with Triggers......7-2
Copying a program ............................................6-12
Copy Tool ...........................................................4-58
Correcting the distorted images due to the
installation..........................................................5-33
Cut-off process of the matching rate .................. A-5