Owner's manual

ManualsBrandsKEYENCE ManualsSensorsIV Series

Vision Sensor

IV Series Setting Guide

Monitor Display

 Main screen in [Run]

 Main screen in [Program]

(1) [Run]/[Program] switch button

Switches the main screen in [Run] and [Program].

(2) Program information

Displays the program number and name.

(3) [Detail] button

Displays the Program Details screen.

(4) [Image Hist.] button

Displays the Sensor’s internal image history screen.

(5) [I/O Settings] button

Displays the I/O setting screen.

(6) [Advanced] button

Displays the Advanced sensor setting screen.

(7) Menu bar

Operate the menus which is in the menu bar.

(8) Status bar

Displays the result (OK/NG), the trigger type, and the processing

time.

(9) Image tool bar

Displays the menu to operate the image displayed.

(10) Tool window

Displays the tool window which has been set.

(11) Search window

If the search window of the tool is set, the range will be displayed

with a light blue frame.

(12) Brightness correction range

When the Brightness correction is set, the range will be displayed

with a blue frame.

(13) Statistical information display

Displays the statistical information of the status result.

(14) Sensor information

Displays the model, device name, MAC address, and how it is

connected to the sensor (direct connection or network connection).

(15) Status gauge

Displays the status of the tools which have been set.

(16) Tool information

Displays the information for the selected tool.

(17) [Sensor Setup] button

Displays the setting screen.

(18) [Limit Adjustment] button

Displays the “Limit Adjustment” screen.

(19) [Inspection Tool Auto Tuning] button

Displays the “Tool Auto Tuning” screen.

(20) Master image display

Displays the master image registered to the selected program.

463GB

(5) (6)

(7)

(8)

(9)

(10)

(15)

(7)

(8)

(17)

(18)

Tool name



Judge is NG

Threshold

Matching rate and

Status result

(1) (2) (3) (4)

(16)

(11)

(12)

(13)

(14)

(19)

(9)

(12)

(14)

(5) (6) (1) (2) (3) (4)

(20)



Judge is OK

Summary of content (5 pages)

PAGE 1
(7) Menu bar 463GB Operate the menus which is in the menu bar. (8) Status bar Displays the result (OK/NG), the trigger type, and the processing time. Vision Sensor IV Series Setting Guide (9) Image tool bar Displays the menu to operate the image displayed. (10) Tool window Displays the tool window which has been set. (11) Search window If the search window of the tool is set, the range will be displayed with a light blue frame.
PAGE 2
Basic setting Operation for initial start-up 1. Turn on the power of the sensor.  Starting the Navigator 2. Double click the [IV-Navigator] icon. Click the [Sensor setup] button to proceed to “STEP1”. 3. Click the [Direct connection] button.  Setting the Image Optimization 1. Click the [Trigger Options] button. 4. Click the [Connect] button. 2. Select the Trigger type. 5. Select the output polarity of the sensor. 6. The sensor setup screen will be displayed.
PAGE 3
4. Click [Automatic Brightness Adjustment] button. 2. Image the target and click the [Trigger ON] button. 3. Check the image displayed and click the [Register the image] button. 5. Click [Focus Adjustment] button. 4. Click the [OK] button. 5. Click the [Next to STEP3] button to proceed to “STEP3”.  Setting the detection tool (outline tool) 1. Click the [Add Tool] button. 2. Click the [Outline] button and click the [OK] button. [Auto focusing type]: Click the [Auto Focus Adjustment] button.
PAGE 4
6. Set the threshold to judge OK and NG. 7. Click the [Limit Adjustment] button. 7. After the setting is completed, click the [OK] button. The display will return to the main screen for the Outline tool settings. 8. Click the [OK] button. 8. Set the threshold to judge OK and NG. 9. After the setting is completed, click the [Next to STEP4] button to proceed to “STEP4”.  Setting the detection tool (Color Area/Area tool) 1. Click the [Add Tool] button. 2.
PAGE 5
. Click the [Limit Adjustment] button. Start running 1. Touch the [RUN] button. 6. Set the threshold to judge OK and NG. 2. Confirm that the main screen is [Run]. 7. After the setting is completed, click the [OK] button. The display will return to the main screen for Position Adjustment tool settings. 8. Click the [OK] button. 9. After the setting is completed, touch the [Next to STEP4] button to proceed to “STEP4”.  Setting the output 1. Click the output line to assign the output function.