Manual

ManualsBrandsKEYENCE ManualsSensorsIV Series

IV Series (Sensor) - IM_E

Vision Sensor

IV-500C / IV-500CA /

IV-500M / IV-500MA /

IV-150M / IV-150MA /

IV-2000M / IV-2000MA

Instruction Manual

Read this manual before using the product in order to

achieve maximum performance.

Keep this manual in a safe place after reading it so that it

can be used at any time.

For details of functions, refer to the IV Series User's Manual

(Monitor) or the IV Series User's Manual (PC).



The IV Series User's Manual can be downloaded from the

KEYENCE web site:

http://www.keyence.com/

Symbols

The following symbols alert you to important messages.

Be sure to read these messages carefully.

It indicates a hazardous situation which, if not

avoided, will result in death or serious injury.

It indicates a hazardous situation which, if

not avoided, could result in death or serious

injury.

It indicates a hazardous situation which, if not

avoided, could result in minor or moderate

injury.

It indicates a situation which, if not avoided,

could result in product damage as well as

property damage.

It indicates cautions and limitations that must

be followed during operation.

It indicates additional information on proper

operation.

It indicates tips for better understanding or useful

information.

Cautions

(1) Unauthorized reproduction of this manual in whole or

part is prohibited.

(2) The contents of this manual may be changed for

improvements without prior notice.

(3)

An utmost effort has been made to ensure the contents of

this manual are as complete as possible. If there are any

mistakes or questions, please contact a KEYENCE ofce

listed in the back of the manual.

(4) Regardless of item (3), KEYENCE will not be liable for

any effect resulting from the use of this unit.

(5) Any manuals with missing pages or other paging faults

will be replaced.

The company names and product names used in this

manual are registered trademarks or the trademarks of their

respective companies.

Safety Information for IV series

General Precautions



Do not use this product for the purpose to

protect a human body or a part of human body.



This product is not intended for use as an

explosion-proof product. Do not use this

product in a hazardous location and/or

potentially explosive atmosphere.



You must verify that the IV Series are

operating correctly in terms of functionality

and performance before the start and the

operation of the IV Series.



We recommend that you take substantial

safety measures to avoid any damage in the

event of a problem occurring.



KEYENCE never warrants the function or

performance of the IV Series if it is used in manner

that differs from the IV Series specications

contained in this instruction manual or if the IV

Series are modied by yourself.



When the IV Series is used in combination with

other instruments, functions and performance

may be degraded, depending on operating

conditions and the surrounding environment.



Do not place the instruments, including

peripherals, under rapid temperature

change. It may cause condensation and may

damage instruments or peripherals.



Remove the power cable from the power supply

if you do not use this product for a long time.

Safety precautions on LED product

Use of controls or adjustments or

performance of procedures other than those

specied herein may result in hazardous

radiation exposure. Follow the instructions

mentioned in this manual. Otherwise, injury to

the human body (eyes and skin) may result.



Do not stare into the direct or specularly

reected beam.



Do not disassemble this product. The laser

radiation emission from this product is not

automatically stopped when it is disassembled.



Do not direct the beam at people or into

areas where people might be present.



Be careful of the path of the LED beam.

If there is a possibility that the operator

may be exposed to the specular or diffuse

reections, block the beam by installing a

protective enclosure.



Install this product so that the path of the

LED beam is not as the same height as that

of human eye.

Important Instructions

Observe the following precautions to prevent malfunction of

the IV Series and to ensure that it is used properly.

Precautions on use



The power of this product and instruments

connected to this product must be turned off

when the cable is to be installed or removed.

Failure to do so may cause an electric shock

or a product damage.



Use this product in the correct supply voltage.

Failure to do so may cause a product damage.

96M12230

Summary of content (10 pages)

PAGE 1
96M12230 Safety Information for IV series General Precautions Vision Sensor yyDo not use this product for the purpose to protect a human body or a part of human body. yyThis product is not intended for use as an explosion-proof product. Do not use this product in a hazardous location and/or potentially explosive atmosphere.
PAGE 2
yyFor instructions yyDo not turn OFF the power while setting the items or saving the settings. Otherwise, all or part of the setting data may be lost. yyDo not let water, dust or oil stick to the camera/light of the sensor. Failure to do so may cause a malfunction. yyWhen this product becomes dirty, do not rub it with a wet cloth, benzene, thinner, or alcohol. Doing so may change the color or shape of the unit.
PAGE 3
Name and function of each part Optional parts for sensor Dome attachment Name and function of each part of sensor 1 yyIV-D10 2 Mounting screw x 2 3 4 Hexagon wrench (L-shaped) x 1 Dome attachment x 1 5 Instruction Manual x 1 Polarized visible light filter attachment yyOP-87436 Mounting screw x 2 Instruction Manual x 1 Polarized visible light filter attachment x 1 Infrared polarization filter attachment yyOP-87437 6 Mounting screw x 2 Instruction Manual x 1 7 8 Infrared polarizati
PAGE 4
Operation of the indicator light Mounting Details on operations of indicator light are shown below. 4 yyGround (functional ground) the drain cable (FG) of the power I/O cable. yyMount and insulate the sensor. Use the attached mounting adapter to insulate. Sensor case has been grounded. If the sensor is not insulated, electric potential and noises may cause a damage or malfunction.
PAGE 5
Installed distance WD (mm) Short-range type zz Mounting the sensor onto the mounting adapter 1 Mount the sensor to the left and right stopper on 150 the mounting adapter. Sensors cannot be mounted on the side with the indicator light.
PAGE 6
Selecting PNP output zz Cables When PNP is selected in I/O format Connecting the power I/O cable of the sensor Brown (DC24V) 1 Adjust the pins of the connector for the power I/O Pink/Yellow/ Light Blue/Purple/ Green/Red (IN) cable and pin connection of the cable connector, and connect the cable to the sensor. Black/White/Gray/ Orange (OUT) Blue (0V) Adjust the pins and the pin connection Wiring color Tightening torque of the screws needs to be 1.0 to 1.5 N·m.
PAGE 7
Circuit Diagram Input circuit No-voltage input (When NPN output is selected) Output circuit When NPN output is selected When NPN is selected in I/O format, the circuit becomes no-voltage input circuit. External power supply is not necessary. : 2 V or lower yyON voltage : 0.1 mA or lower yyOFF current : 2 mA (short circuit) yyON current When NPN is selected in I/O format, the circuit becomes open collector NPN output circuit. : 26.4 V, 50 mA yyMaximum rating yyRemaining voltage : 1.
PAGE 8
Dimensions Sensor IV-500C / IV-500CA / IV-500M / IV-500MA / IV-150M / IV-150MA / IV-2000M / IV-2000MA (102) R R5 0 52 50 (108) 0.4 10.5 10.5 6 50 10.5 32.4 57.4 Focusing position adjustment screw (MF type only) 41 81.5 Mounting adapter 56 58 20 1/4-20UNC (Depth 6mm) WD reference surface 45.5 25 4-M4 (Depth 6mm) Power I/O cable OP-87440 (2m) / OP-87441 (5m) / OP-87442 (10m) 2000 5000 10000 φ15 45 φ6.7 120 5 150 5 180 5 Bracket OP-87685 112.5 56 19.6 31.6 93 48.
PAGE 9
Specifications Model Installed distance View Image sensor Pixel Focus adjustment Exposure time Amplifier type Lights Lighting method Type Tools Number*2 Switch settings (programs) Numbers Image history *3 Condition Analysis information*6 Other functions Indicators Input Inputs Function Output Outputs Function IV-500C IV-500CA IV-500M Standard distance (50 to 500 mm) IV-500MA IV-150M IV-150MA IV-2000M IV-2000MA Short range (50 to 150 mm) Long range (300 to 2000 mm) Installed distance 50 mm : Installed dis
PAGE 10
Warranties and Disclaimers (1) KEYENCE warrants the Products to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment. If any models or samples were shown to Buyer, such models or samples were used merely to illustrate the general type and quality of the Products and not to represent that the Products would necessarily conform to said models or samples.