User guide

4-4
IL-E
4
Setting Various Functions
4-2 Basic Settings and Advanced Settings
The following items can be set.
List of Setting Items
Type Setting items Description
Reference
page
1. Measurement direction
Set whether the display value
increases or decreases when the
object approaches the sensor head.
4-8
2. Sampling rate
Set the data sampling rate. To
sample at a high speed, set a faster
rate, and if the incoming light level is
low, set a slower rate.
4-8
3. Averaging rate, Step count filter,
High-pass filter
Set the averaging for the data
retrieved from the sampling rate.
4-9
4. Alarm setting
Set the alarm response when the
measurement range is exceeded, or
when the light amount is excessive
or insufficient.
4-13
5. Output state
According to the judgment value
(P.V.), select the output state (N.O./
N.C.) of judgment output ON/OFF.
4-14
6. Hold function
The hold method is set for the
judgment value (P.V.).
4-15
7. Timing input
Set the timing input response used
for the hold function.
4-23
8. Delay timer
Set the delay timer for the judgment
output.
4-23
9. Hysteresis
Set the hysteresis used to stabilize
the judgment output.
4-26
10. Analog output scaling
The analog output scaling for the
judgment value (P.V.) is set.
4-27
Basic setting
FKT
52F
#X'
#./
QWV
Advanced setting
*.F
VK/
F.;
*;5
#P)