User guide

3-3 Explicit Messaging
3-33
3
Communicating with the IL Series
- DeviceNet Compatible Network Unit DL-DN1 User’s Manual (IL) -
Nx10+4
69
Averaging/Diff. count filter/High-pass
filter
R/W 4
0: 1 time
1: 2 times
2: 4 times
3: 8 times
4: 16 times
5: 32 times
6: 64 times
7: 128 times
8: 256 times
9: 512 times
10: 1024 times
11: 2048 times
12: 4098 times
13: Diff. count filter
14: High-pass filter
6A Output mode R/W 0
0: N.O.
1: N.C.
6B Reserved
6C Hold function setting R/W 0
0: Sample hold
1: Peak hold
2: Bottom hold
3: Peak-to-Peak hold
4: Auto peak hold
5: Auto bottom hold
6D
Auto peak hold or auto bottom hold
trigger level
*4 R/W 1.000 -99.999 to +99.999
6E Timing input setting R/W 0
0: Level
1: Edge
6F Delay timer R/W 0
0: OFF
1: On delay
2: Off delay
3: One shot
70 Timer duration R/W 60 5 to 9999
71 Hysteresis R/W 0 0 to 99.999
72 Analog output scaling *16 R/W 0
0:Initial state
1: Free range
2: Bank
73 Analog output upper limit
*4
*16
R/W 10.000 -99.999 to +99.999
74 Analog output lower limit
*4
*16
R/W -10.000 -99.999 to +99.999
75 External input setting *17 R/W 0
0: Initial state
1: User setting
76 External input 1 *17 R/W 0
0: Zero shift input
1: Bank A input
2: Bank B input
3: Laser emission stop input
4: Not use
77 External input 2 *17 R/W 0
0: Reset input
1: Bank A input
2: Bank B input
3: Laser emission stop input
4: Not use
78 External input 3 *17 R/W 0
0: Timing input
1: Bank A input
2: Bank B input
3: Laser emission stop input
4: Not use
79 External input 4 *17 R/W 4
0: Not used
1: Bank A input
2: Bank B input
3: Laser emission stop input
InstID
(DEC)
AttrID
(HEX)
Name Description Attribute
Default
value
Parameter range