User guide

3-3 Explicit Messaging
3-29
3
Communicating with the IL Series
- DeviceNet Compatible Network Unit DL-DN1 User’s Manual (IL) -
N
73
Two-point tuning HIGH side
1st point confirmation
operation request
C
Executes 2-point tuning.
For the operating procedure, refer to the IL Series User's Manual.
74
Two-point tuning HIGH side
2nd point confirmation
operation request
(Determine HIGH setting
value.)
C
75
Two-point tuning LOW side
1st point confirmation
operation request
C
76
2-point tuning LOW side 2nd
point confirmation operation
request (Determine LOW
setting value.)
C
77
Calibration
SET1 Confirmation
operation request
C
Performs calibration.
The R.V. value you wish to display is set with the IL Series
attributes "Calibration function SET1" and "Calibration function
SET2".
For the operating procedure, refer to the IL Series User's Manual.
78
Calibration
SET2 Confirmation
operation request
(Perform calibration.)
C
79
Calculated value two-point
calibration
SET1 Confirmation
operation request
C
Performs calculated value two-point calibration. (Main unit only)
The R.V. value you wish to display is set with the IL Series
attributes "Calculated value two-point calibration function SET1"
and "Calculated value two-point calibration function SET2".
For the operating procedure, refer to the IL Series User's Manual.
7A
Calculated value two-point
calibration
SET2 Confirmation
operation request
(Perform calculated value
two-point calibration.)
C
7B
Calculated value three-point
calibration
SET1 Confirmation
operation request
C
Performs calculated value three-point calibration. (Main unit only)
The R.V. value you wish to display is set with the IL series
attributes "Calculated value three-point calibration function
SET1" and "Calculated value three-point calibration function
SET3".
For the operating procedure, refer to the IL Series User's Manual.
7C
Calculated value three-point
calibration
SET2 Confirmation
operation request
C
7D
Calculated three-point
calibration
SET3 Confirmation
operation request
(Perform calculated three-
point calibration.)
C
7E
One-point tuning request for
diff. count filter
C
Performs one-point tuning for the diff. count filter.
For the operating procedure, refer to the IL Series User's Manual.
7F
Two-point tuning 1st point
confirmation operation
request for diff. count filter
C
Performs two-point tuning for the diff. count filter.
For the operating procedure, refer to the IL Series User's Manual.
80
Two-point tuning 2nd point
confirmation operation
request for diff. count filter
(Determine HIGH and LOW
setting value.)
C
81 to
83
Reserved
InstID
(DEC)
AttrID
(HEX)
Name Description Attribute