User guide

4
Copyright (c) 2010 KEYENCE CORPORATION. All rights reserved.
11275E 1110-2a 96M11275 Printed in Japan
Specifications
*1 This is supplied both from the main unit of the sensor amplifier which connects to the
DL-DN1 and the network power supply.
*2 "D-bus" is the name of KEYENCE's wiring-saving system for sensor amplifiers.
*3 Depends on the sensor amplifiers connected.
Dimensions
tinU krowteN elbitapmoC teNeciveDeman tcudorP
1ND-LDledoM
tnailpmoc teNeciveDdohtem noitacinummoC
DeviceNet
specifications
Compliant functions
I/O Message (polling)
Explicit Message
Address setting 0 to 63 (PGM compatible).
Baud rate
(automatically switched)
500 kbps/250 kbps/125 kbps
Maximum
cable length
500 kbps 100 m (thick cable) / 100 m (thin cable)
250 kbps 250 m (thick cable) / 100 m (thin cable)
125 kbps 500 m (thick cable) / 100 m (thin cable)
Network power supply
Power voltage: 11 to 25 VDC
(supplied from DeviceNet communication
power supply)
Power consumption: 820 mW or less
(34 mA max. at 24 V, 50 mA max. at 12 V)
*1
Sensor
amplifier
connection
specifications
Connectable sensors Sensor amplifiers with D-bus support
*2
Number of connectable
sensor units
15 units max.
*3
Indicator lamps
Network status indicator: 2-color (green/red)
LED
Module status indicator: 2-color (green/red)
LED
Sensor communication indicator:2-color
(green/red) LED
Power voltage
20 to 30 VDC, including ripple (P-P) 10%
(supplied from the connected sensor amplifiers)
)V 42 ta .xam Am 72( ssel ro Wm 066noitpmusnoc rewoP
*1
Environmental
resistance
Operating surrounding air
temperature
-20 to +55°C (no freezing)
Operating surrounding air
humidity
35 to 85% RH (no condensation)
Vibration resistance
10 to 55 Hz, compound amplitude 1.5 mm, 2
hours each in X, Y, Z directions
Pollution degree 2
Materials
Main unit case and dust cover: Polycarbonate
DeviceNet connector: Polyamide (plug), PBT
(socket)
Weight (including connectors) Approx. 80 g
DL-DN1_IM_E.fm 4 ページ ２０１０年９月２１日 火曜日 午前９時３１分
WARRANTIES AND DISCLAIMERS
(1) KEYENCE warrants the Products to be free of defects in materials and
workmanship for a period of one (1) year from the date of shipment. If any
models or samples were shown to Buyer, such models or samples were
used merely to illustrate the general type and quality of the Products and
not to represent that the Products would necessarily conform to said
models or samples. Any Products found to be defective must be shipped to
KEYENCE with all shipping costs paid by Buyer or offered to KEYENCE
for inspection and examination. Upon examination by KEYENCE,
KEYENCE, at its sole option, will refund the purchase price of, or repair or
replace at no charge any Products found to be defective. This warranty
does not apply to any defects resulting from any action of Buyer, including
but not limited to improper installation, improper interfacing, improper
repair, unauthorized modification, misapplication and mishandling, such as
exposure to excessive current, heat, coldness, moisture, vibration or
outdoors air. Components which wear are not warranted.
(2) KEYENCE is pleased to offer suggestions on the use of its various
Products. They are only suggestions, and it is Buyer's responsibility to
ascertain the fitness of the Products for Buyer’s intended use. KEYENCE
will not be responsible for any damages that may result from the use of the
Products.
(3) The Products and any samples ("Products/Samples") supplied to Buyer are
not to be used internally in humans, for human transportation, as safety
devices or fail-safe systems, unless their written specifications state
otherwise. Should any Products/Samples be used in such a manner or
misused in any way, KEYENCE assumes no responsibility, and additionally
Buyer will indemnify KEYENCE and hold KEYENCE harmless from any
liability or damage whatsoever arising out of any misuse of the Products/
Samples.
(4) OTHER THAN AS STATED HEREIN, THE PRODUCTS/SAMPLES ARE
PROVIDED WITH NO OTHER WARRANTIES WHATSOEVER. ALL
EXPRESS, IMPLIED, AND STATUTORY WARRANTIES, INCLUDING,
WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT
OF PROPRIETARY RIGHTS, ARE EXPRESSLY DISCLAIMED.
IN NO EVENT SHALL KEYENCE AND ITS A FFILIATED ENTITIES BE
LIABLE TO ANY PERSON OR ENTITY FOR ANY DIRECT, INDIRECT,
INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES
(INCLUDING, WITHOUT LIMITATION, ANY DAMAGES RESULTING
FROM LOSS OF USE, BUSINESS INTERRUPTION, LOSS OF
INFORMATION, LOSS OR INACCURACY OF DATA, LOSS OF
PROFITS, LOSS OF SAVINGS, THE COST OF PROCUREMENT OF
SUBSTITUTED GOODS, SERVICES OR TECHNOLOGIES, OR FOR
ANY MATTER ARISING OUT OF OR IN CONNECTION WITH THE USE
OR INABILITY TO USE THE PRODUCTS, EVEN IF KEYENCE OR ONE
OF ITS AFFILIATED ENTITIES WAS ADVISED OF A POSSIBLE THIRD
PARTY’S CLAIM FOR DAMAGES OR ANY OTHER CLAIM AGAINST
BUYER. In some jurisdictions, some of the foregoing warranty disclaimers
or damage limitations may not apply.
BUYER'S TRANSFER OBLIGATIONS:
If the Products/Samples purchased by Buyer are to be resold or delivered
to a third party, Buyer must provide such third party with a copy of this
document, all specifications, manuals, catalogs, leaflets and written
information provided to Buyer pertaining to the Products/Samples.
E 1110-2
Specifications are subject to change without notice.
KEYENCE CORPORATION
1-3-14, Higashi-Nakajima, Higashi-Yodogawa-ku,
Osaka, 533-8555, Japan
PHONE
: +
81-6-6379-2211
A6WW1-MAN-1090
CANADA
Phone: [phone]
CHINA
Phone: [phone]
CZECH REPUBLIC
Phone: [phone]
GERMANY
Phone: [phone]
FRANCE
Phone: [phone]
AUSTRIA
Phone: [phone]
HONG KONG
Phone: [phone]
BELGIUM
Phone: [phone]
ITALY
Phone: [phone]
JAPAN
Phone: [phone]
KOREA
Phone: [phone]
MEXICO
Phone: [phone]
MALAYSIA
Phone: [phone]
NETHERLANDS
Phone: [phone]
HUNGARY
Phone: [phone]
POLAND
Phone: [phone]
SINGAPORE
Phone: [phone]
SLOVAKIA
Phone: [phone]
SWITZERLAND
Phone: [phone]
THAILAND
Phone: [phone]
TAIWAN
Phone: [phone]
UK & IRELAND
Phone: [phone]
USA
Phone: [phone]
125
°
max.
(42.2)
56.3
78.2
35.424.1
35.5
49.5
37.7 2.4
58.3 max.
When cover is opened :
9.6 5.4
29.4
(Unit: mm)