User Manual

3-4 Command Parameter List
3-31
3
Communicating with the FD-MH series
- CC-Link Compatible Network Unit DL-CL1 User’s Manual (FD-MH) -
*9 If value 000.0 is written, warning is not issued even when the temperature falls
below the lower limit of temperature display range, but it is issued only when the
temperature exceeds the upper limit setting.
*10 If "analog output selection" is set to "standard", rewriting "free range analog
upper limit" or "free range analog lower limit" fails.
*11 Available only to FD-M (version A).
*12 The read character string is stored in ASCII code into the remote register.
For "FD-M": RWr03 = 4D2Dh, RWr02 = 4446h