Owner's manual

KEYENCE CORPORATION. Vision System Division
‐ 7 ‐ www.keyence.com
✎Configuring the KV Series Settings
2
1
Enter the "Project name", select the "PLC model", and then press "OK".
Start KV STUDIO with the PLC connected to the computer, and select [File] > [New project].
3
Select [Read unit setting] in the "Confirm unit setting information" dialog box.
4
In the workspace, click the link unit or CPU unit that will be connected to the CV-X via RS-232C to start "Unit
Editor", and change the "Operation mode" of "Port 1" to "KV BUILDER/KV STUDIO mode" on the "Setup
unit(2)" tab.
The following message appears. Select "Yes".