Users Manual

4
BT-A500 IM GB
 UL certification BT-A500GA only
The BT-A500GA complies with the following UL/CSA standards and has obtaied the UL/
C-UL certifications.
• Applicable standards UL 62368-1
CAN/CSA-C22.2 No. 62368-1
• UL File No. E167973
• UL categor
y AZOT/AZOT7
 Mexico (Méjico) BT-A500GA only
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible
que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o
dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su
operación no deseada.
 CE Marking BT-A500GE only
KEYENCE Corporation has confirmed that this product complies with the essential
requirements of the applicable EU Directive(s), based on the following specifications. Be
sure to consider the following specifications when using this product in the Member
States of European Union.
• RE Directive
• RoHS Directive
The full text of the EU declaration of conformity is available at the following internet
address: http://www.keyence.com/cedoc
• Frequency band of operation: Maximum radio-frequency power
2400 ~ 2483.5 MHz: 19.54 dBm (89.85 mW)
5180 ~ 5320 MHz: 22.98 dBm (198.61 mW)
These specifications do not give any guarantee that the end-product with this product
incorporated complies with the essential requirements of RE and Machinery Directive.
The manufacturer of the end-product is solely responsible for the compliance on the
end-product itself according to these Directives.
The device is restricted to indoor use only when operating in the 5150 to 5350 MHz fre-
quency range.
 Handling of packing
Clean the following parts with air blow periodically.
If removing dirt is difficult, use a cotton swab to clean the contacts directly.
(Use absolute ethanol if dirt is stuck on them.)
Remove the battery attachment cover before cleaning the battery contact.
When opening the package, check the following items are all included.
If there is something missing, product failure or damage, contact your nearest KEYENCE
sales office.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE.
DISPOSE OF US
ED BA
TTERIES ACCORDING TO THE INSTRUCTIONS.
AT BE BG HR CY CZ DK
EE FI FR DE EL HU IE
IT LV LT LU MT N L PL
PT RO SK SI ES SE UK
IS LI NO CH TR
Explanation of symbols
 DC Mark  WEEE
This symbol indicates a direct current.
This symbol indicates a
separate collection for
WEEE.
 Stand-by Mark
This symbol indicates a stand-by
condition.
CAUTION
Precautions for proper use
• The BT-A500 Series has an enclosure rating of IP65, however, if the
"battery attachment cover" is not properly attached, these enclosure
ratings cannot be guaranteed. When using in environments where
water or dust is present, check if these are properly attached.
• Dropping the BT-A500 Series or subjecting it to extreme shock may
lead to the loss of water-proofing.
Cleaning
If dirt or dust is attached, contact failure may occur on the battery/
charging/communication contacts. This may cause charging function
to deteriorate and instantaneous interruption.
Make sure that waste textile is not attached to the battery/charging/
communication contacts when cleaning.
Checking the Package
NOTICE
Charging/
communication contact
Scanner
(Laser emission part)
Battery contact
NOTICE
 BT-A500/A500G/A500GC/A500GM/A500GA/A500GE
Main unit…1 Battery attachment cover ...1 Instruction Manual...1