User's Manual

2-16
2
First Steps
2-7 Reading a Barcode
This section describes the basic barcode scanning operations.
Scanning a Barcode
The BL-N90/N90K is able to read barcodes when it is connected wirelessly to the communication unit.
The wireless connection can be verified by checking that the blue LED on the communication
unit is lit ( page 1-6).
1 Press the "Trigger" switch to activate the laser.
As the laser is activated, the blue LED on the BL-N90/N90K lights up .
2 Aim the laser to cover the entire barcode.
3 Once scanning is complete, the white LED lights up, a beep will sound once ,
and data is transmitted to your computer.
Readable area
Laser light
Reading distance
100mm
Trigger switch
Operation check LED
1