User's Manual

2-15
2
First Steps
2-6 Initial Setup for the BL-N90/N90K
After establishing a connection between the BL-N90/N90K and the communication unit, be
sure to initialize its configuration. This ensures that the scanner's configuration is initialized to
match the interface type of the communication unit.
Procedure
1 Press the "Trigger" switch to activate the laser.
2 With the laser light about 100 mm from the page, scan the "Initialization" barcode below.
Once scanning of the "Initialization" barcode is complete, a beep will sound 3 times.
<Initialize>