User's Manual

2-2
2
First Steps
2-1 The Setup Procedure
Before using the BL-N90/N90K, the following connections must be set up.
Performing these connections establishes the following communications, enabling the BL-
N90/N90K for use.
• Communication unit to PC connection: Wired transmission
• BL-N90/N90K to communication unit connection: Wireless transmission (Bluetooth)
b First steps
Note
After connecting the communication unit to the computer, be sure to charge
the BL-N90/N90K before use.
1
Connect the power cable to the communication unit. ( page 2-3).
2
Connect the communication unit to your computer ( page 2-5).
3
Charge the BL-N90/N90K ( page 2-11).
4
Establish a connection between the BL-N90/N90K and the communication
unit ( page 2-13).
Use the BL-N90/N90K to read the BD address barcode attached to the
communication unit.
5
Initialize settings for the BL-N90/N90K. ( page 2-15).
Read the initialization barcode using the BL-N90/N90K.