Instruction Manual
Table Of Contents
- Contents
- Preface
- Safety Precautions
- Operating Environment
- Features and Functions of the NE-W01E
- Examples of Networks Built Using NE-W01E
- Checking the Contents of the Package
- Names of Parts
- Installing the NE-W01E
- Power Connection and Ground
- Periodic Maintenance and Inspection
- Precautions When Replacing the Body
- Troubleshooting
- Specifications
- External Dimensions
7
Operating Environment
■ Installation location
Do not install the NE-W01E in the following locations.
Locations subject to direct sun-
light
Locations subject to ambient temper-
ature out of the 0 to +50°C range
Locations subject to ambient humid-
ity out of the 35 to 80%RH range
Locations subject to condensa-
tion caused by sudden tempera-
ture change
Locations subject to corrosive
and flammable gases
Locations subject to large
amounts of dirt and dust, salt,
iron and oil smoke
Locations directly subject to vibra-
tion and shock
Locations that may be splashed
with water, oil or chemical mist
Locations where strong magnetic
and electrical fields are gener-
ated
Chem
icals
oil
Electrical
field
Magnetic
field
Note: Install the NE-W01E as far away as possible from locations where radios, etc.
are located. Radio waves emitted by the NE-W01E may cause noise to occur
on the radio.