KD-X222PO 4K HDMI over CAT5e/6 HDBaseT Extender Tx + Rx Kit. 10.2Gbps Bandwidth. IR Emitter and Sensor Included.
1 Table of Contents Key Features Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 › HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, Quick Setup Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Installation and Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 3 Accessories Application Example › (1) 12V 2A DC Power Supply (Screw-In Type), model KD-PS12V2ASC, (2) Mounting Brackets, (1) IR Emitter, (1) IR Sensor › KD-X222PO only requires power on the Tx unit, which extends power to the Rx unit Quick Setup Guide Find a safe and convenient location to mount or place your KD-X222PO units Step 2: Begin with the KD-X222PO Tx/Rx units and all input/output devices turned off with power cables removed Step 3: Connect your HDMI source to the input port of your K
5 Connections › Connect the CAT5e/6 cable at the port labeled “CAT5e/6 Input”. Use 568-B Termination. Before making any connections, power off your source and display devices. Tx Unit: › Using a short HDMI cable, connect your source device to the HDMI port labeled “HDMI Input”. For DVI-D/DVI-I sources, use appropriate adapters. For Display Port, use active converters. › If you are sending or receiving IR, connect included IR Sensor and/or IR Emitter.
6 7 » Rx Unit / IR Sensor: Key Digital RS-232 Cable Pinout Charts Model KD-3.5FDB96 3.5mm Stereo to Female DB9 (sold separately) KD-3.5FDB96 with 3.5mm TRS Connector Model KD-3.5MDB96 3.5mm Stereo to Male DB9 (sold separately) KD-3.5MDB96 with 3.5mm TRS Connector Wire DB9 Pin Signal Red 2 TxD White 3 RxD Black 5 Ground Green N/C NA KD-3.5FDB96 after stripping wire Wire DB9 Pin Signal Red 2 TxD Black 3 RxD Shield 5 Ground KD-3.
8 9 Settings Control Rotary Position Assignments: Position EDID Control EDID authentication is provided from the KD-X222/ KD-X222PO Tx unit to the connected input / source device. The EDID file (AKA “handshake”) is selected using the EDID Control rotary on the Tx unit and provides a list of compatible video and audio formats as well as digital data, informing the source device what it should output.
10 11 LED Indicator Lights Pin Signal Corresponding Wire (Accessory) Power: » Color: Green » Solid illumination during power on state, as provided by healthy connection with power supply.
12 13 Help Command: KD-X222PO > H -------------------------------------------------------------------------Key Digital Systems HELP --------------------------------------------------------------------------- KD-X222PO System Address : 00 F/W Version : 1.
14 Rev 3 – Dec 2020 Key Digital®, led by digital video pioneer Mike Tsinberg, develops and manufactures high quality, cutting-edge technology solutions for virtually all applications where high-end video and control are important. Key Digital® is at the forefront of the video industry for Home Theater Retailers, Custom Installers, System Integrators, Broadcasters, Manufacturers, and Consumers. Key Digital® :: 521 East 3rd Street :: Mount Vernon, NY 10553 Phone : 914.667.9700 Fax : 914.668.
