IN THE BOX: Synchrony K2 Pro Bluetooth Mechanical Keyboard x 1 Type-C Cable * 1 Manual * 1 Quick Start Guide * 1 Extra Key caps Set * 1
Quick Start Guide If you are a Windows user, please find the appropriate key caps in the box, then follow the instructions below to find and replace the following key caps.
3 The VIA Key Remapping Software Please visit cankisevia.com to download the Latest VIA software to remap the keys. V/A If the VIA software cannot recognize your keyboard, please reach out to aur support so to get the Instruction. VIA only works when Yoxlotnasbes iat the keyboard Is connected by wire to the computer.) 4 tho Layers There are four layers of key settings an the Your system toggle bs switched If your system ropes such to Widower, then keyboard.
5 The Back light Press fin+ Qto change the lighting effect Press fn + tab to tun the back light on/off 6 Adjust The Fightback Brightness Press Increase the back light brightness Press decrease the fightback brightness er Ca Err CEE HE EE El
Adjust The Fightback Speed Press Increase the It effect speed Press decrease the light effect speed of keyboard during the warranty period, we wil ably replace: the defective parts of the keyboard, not the whole keyboard.
© Watch The Eliding Tutorial On Our Website: you are building the keyboard far the first time, we highly recommend you watch the building tutorial video on our ‘website first, then start building the keyboard yourself. Troubleshooting? Don't know what's going on with the keyboard? @ Try factory reset by pressing (for 4 seconds). (® Download the right firmware for your keyboard from our website, Remove the power cable from the keyboard.
K2 PRO BLUETOOTH MECHANICAL KEYBOARD SPECIFICATIONS Number of keys: 84 Switch type: Mechanical Battery: 4000mAh ‘Working time: Around 70 hours with the back light on.
K2 PRO BLUETOOTH MECHANICAL KEYBOARD OVERVIEW eee pou) © Bluetooth indicator @ Charging port © Battery Indicator @ Win/Android Macias (OS Toggle Switch) © BT OFF Cable (Mode Toggle Switch)
DEFAULT KEY LAYOUT: LAYER 0: This layer will be activated when your keyboard's system toggle is switched to Mac.
LAYER 1: This layer will be activated when your keyboard's system toggle is switched to Mac and press the key.
LAYER 2: This layer will be activated when your keyboard's system toggle is switched to Windows.
LAYER 3: This layer will be activated when your keyboard's system toggle is switched to Windows and press the key.
LED STATUS OVERVIEW LED Location Function Sachs Low battery Blinking Red Battery Indicator Charging Charging Static Red Fully charged Static Green Pairing Snow Blinking Bluetooth indicator| Bluetooth Paired Light Off Switching Fast Blinking FUNCTION DESCRIPTION: CHARGING Plug the cable into a USB port and plug the other end into the keyboard port. Charging Indicator: When battery is below 15%, a red battery blinking indicate will be triggered.
BLUETOOTH/WIRED MODE (TOGGLE SWITCH} WIRED MODE 1.Switch the toggle switch to Cable option {it only works when a USB cable is plugged in). 2.Connect our cable with your PC and keyboard. 3. Backiit will be tuned on. “Under Wired Mode, keyboard will not enter Into Battery Saver Mode. BLUETOOTH MODE 1. Switch the keyboard to Bluetooth option. 2. Backbit will be muted on. 3. Hold "FNMA" key for 4 seconds to activate Bluetooth paling (the Bluetooth Indicator fast flashes for 3 minutes to detect pairing. 4.
SWITCH BLUETOOTH DEVICES Short press combination key “fn* 4fn* + “3” to switch to other device. RECONNECT: 1. Switch the keyboard to the Bluetooth caption to activate the keyboard (the keyboard wil connect to the last connected device by default. 2. The Bluetooth indicator flashes for 4 seconds and automatically pairs with the last paired device. 3, if the Bluetooth indicator is off, press any button to enter the connection again. *The keyboard must have been paired with the device to perform this function.
0S SWITCH Tun the switch to Mac/iOS when you are connected to a Mac ar 10S operating system. Switch the toggle to Windows/Android when the keyboard is connected to a Windows or Android ‘operating system. “When using the Windows/Android mode, [T=] keys are used for “Windows” and “Alt” functions.
TROUBLESHOOTING If unable to pair keyboard to device, confirm that the device you're trying to pair with is Bluetooth-capable. ff so, restart the device and try pairing it with the keyboard again. Note: On a Windows computer, a new Bluetooth connection will sometimes require additional software updates—a process that may still be ongoing after a message appears indicating a successful completion. Walt at least 20 minutes after plating to make sure all updates are completed before restarting the computer.
Bluetooth connection Is interrupted even within 10 meter. Check if the keyboard Is resting on a metal surface that can Interfere with the Bluetooth signal. Third party input tools are not compatible with the keyboard. Due to compatibility, versions, brands and drivers of Windows/Android OS, functions of third party input tools may be affected while using the keyboard. Please make sure your operating system and drivers are up to date.
AEE Synchrony K2 Pro BF fk & USB&E x 1 REx 1 RETIREE x 1 BAH x1 BE FFE x1
@ Alejandro Mac/iOS (OSE) © BT OFF Cable (M418) EL BATTLEDRESS: The TEAL RE Ea ATR Fel AREA | FE THEN Fil iT HR-R BF BRIEFER
