User's Manual

Motion : to set up the moving speed of mouse sign, the length of the dragging tail, and non-border, etc.
2. After the function is set u, press “Yes” to store the new setup.
TROUBLESHOOTING
If the mouse or keyboard doesn’t function well, please follow the steps below:
1. Check if the connector of USB or PS/2 port is well connected or not.
2. heck if the positive(+) and negative(-) pole of the battery is put correctly. If the power is low, the mouse will
become sluggish or slow.
3. Reset: Follow the setup of “Setup for use”.
HARDWARE MAINTENANCE AND CLEANING
When the mouse doesn’t move smoothly or its speed is not normal, please clean the rolling ball of he mouse. The
steps are as follows:
1. Follow the arrow
direction (open with clockwise direction, and close with counterclockwise direction) to turn the rolling ball
cap, which is under the mouse, to take out the ball.
2. Wipe the ball with a clean cloth dampen with clean water or alcohol, and wipe the dust inside the mouse
with a dry clean cloth. After the cleaning is done, put back the ball and the cap.
(Caution: never clean with organic dissolvent,)
ENVIRONMENT
To avoid environmental interference, which will reduce the effective distance, it should be noted below for the
mouse and receiver:
1. Do not put the mouse and receiver on metal cabinet or metal desk. It’s better not having metal or
interference source around, which affect the RF communication, and reduce the communication distance.
2. The ideal for the mouse and receiver is having 15-20 cm distant from computers or, in any open place.
3. Keep a distance of more than 1.5m to avoid interference if there are other RF devices in using.
HOW TO REMOVE THE DRIVER
-From the windows taskbar, click the Start, then select Setup, Control desk, Add/Remove program. Find the file
USB wireless Mouse and click Add/Remove.
-in the window Confirm File Deletion, click YES.
For any problem in using this device, please reach to the Customer Service Center through the e-mail n the
website. A response will be forwarded by e-mail to you very soon.