KD-UPS52U 4K/18G USB/Universal Presentation Switcher with 5 Inputs (HDBT, 2xHDMI, DP, USB-C), 2 Mirrored Outputs (HDBT, HDMI), LAN, ARC, Audio De-Embed, IR, RS-232, IP Control, CEC Manager™. Includes Rx.
Table of Contents CONNECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 CONFIGURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 CONTROL . . . . . . . . . . . . . . . . . . .
1 Key Features › Presentation Switcher Kit: Includes KD-UPS52U and KD-X100MRx. Add KD-X4x1WUTx wall plate HDBaseT Tx for plug-in on walls, floor and table boxes › Presentation Switching: 1 HDBaseT, 2 HDMI, 1 Display Port, 1 USB-C source selection by push button, IP, RS-232, IR, auto switching, or trigger control.
2 CONNECT: Test for proper operation of the unit and cables in your system before permanently securing the unit for final installation. Ensure that you leave enough ventilation space to provide sufficient airflow and cooling. Begin with the KD-UPS52U unit, KD-X100MRx, Key Digital wall-plate transmitter (sold separately), all input/output devices, and audio system powered off. 1. Connect HDMI, Display Port, and USB-C sources to the input ports of KD-UPS52U unit 2.
3 Application Example PC (DisplayPort) AppleTV Signage (USB-C) DisplayPort USB-C HDMI DisplayPort HDMI Cable/Satellite USB HDMI USB-C HDMI WiFi Router WiFi TCP/IP HDBT KD-X4x1WUTx K E Y D I G I TA L APP READY TCP/IP Presentation Switcher KD-PS42 with KD-AMP220 USB DSP/Mixer HDBT Audio HDMI RS-232 KD-UPS52U KD-AMP220 KD-X100MRx KD-AMP220 Input 1 2 L/R PCM Mic Control Line Bass Treble Mute Vol RS-232 HDMI USB KD-CAMUSB Note: 18Gbps signal extension requires all 18
4 CONFIGURE: Configure and control KD-UPS52U with Key Digital® Management Software™ Pro (KDMS™ Pro) (Download here: https://goo.gl/ZcyHui). 1. Connect to KD-UPS52U from your PC using the USB micro port on the face of the unit 2. Open the Key Digital® Management Software™ Pro software and perform a USB scan (fig. 1) 3. Choose the detected device from the Devices window (fig. 2a) 4. Set the desired Device Name in the KD-UPS52U Information window (fig. 2b) 5.
5 7. Use the EDID rotary on the rear of the unit to choose the desired handshake that you wish to provide to your connected video sources. If installing a Key Digital wall plate transmitter (sold separately, please ensure that the EDID dial matches the desired setting. 8. Set the Auto Sensing slide switch on the face of the unit to the ON position if you wish for your system to automatically select a newly connected source and/or scan inputs when the current source is disconnected. 9.
6 12. If using KD-App or Key Digital® Management Software™ (KDMS™) set the desired Input/Output names by entering the Input/Output Settings section of the properties window, and selecting the Change Input/Output Name button (fig. 3a), selecting the desired input/output and entering the name (fig. 3b): 13. If utilizing KD-AMP220 and/or KD-CAMUSB integration control mode, choose the KD-AMP220 Control selection box in the Audio/Video properties section.
7 15. Ensure that CEC is enabled on your displays/projectors. Depending on the manufacturer, HDMI-CEC may be given a different name. View THIS ARTICLE for a list of CEC names and how to enable CEC on popular displays. 16. Your unit is now ready to control from the KDMS™ Control Panel, KD-App, or by professional control system.
8 › Perform a network scan in the KD-App/KDMS™ ® Key Digital App on the App Store KDMS™ Pro Download Page › Select and control the selected KD-UPS52U Option 3: Control via professional control system KDMS™ Download Page KD-UPS52U allows control over serial interface for bi-directional communication. Pin: 1 2 3 4 5 6 › For RS-232 control use pins 4, 5, and 6 of the Main Control port › For TCP/IP control, the default static IP address is 192.168.1.239, with port 23 Default static IP address: 192.
9 Technical Support For technical questions about using Key Digital® products, please contact us at: › Phone: 914-667-9700 › E-mail: tech@keydigital.com Important Product Warnings 1. Connect all cables before providing power to the unit. 2. Test for proper operation before securing unit behind walls or in hard to access spaces. 3. If installing the unit into wall or mounting bracket into sheet-rock, provide proper screw support with bolts or sheet-rock anchors.
10 Rev 1 – May 2020 Key Digital®, led by digital video pioneer Mike Tsinberg, develops and manufactures high quality, cutting-edge technology solutions for virtually all applications where high-end video and control are important. Key Digital® is at the forefront of the video industry for Home Theater Retailers, Custom Installers, System Integrators, Broadcasters, Manufacturers, and Consumers. Key Digital® :: 521 East 3rd Street :: Mount Vernon, NY 10553 Phone : 914.667.9700 Fax : 914.668.
