User Manual

3
5. If using KD-App or Key Digital
®
Management Software
™
(KDMS
™
) for control, set the desired Unit
Name in the device information section, and Input/Output names by entering the Input/Output
Settings section of the properties window, and selecting the Change Input/Output Name button (fig.
3a), selecting the desired input/output and entering the name (fig. 3b):
6. Additional settings may be adjusted in the KDMS
™
software. Full access to all settings/commands
is achieved via terminal session using Tera Term or PuTTy software.
7. Your unit is now ready to control from the
KDMS
™
Control Panel, KD-App, or by professional
control system.