User Manual

Forced HPD Troubleshooting Tool

» When ON, Hot Plug Detection voltage is ﬁxed on to the connected display

» Standard HPD behavior when set to OFF position

Auto Sensing

» ON » Unit will automatically select a newly detected active source. If current source is disconnected

or becomes inactive, auto sensing will sequentially advance to an active input/source

» OFF » Unit is in normal mode and regular switching functionality will occur

» IF Auto sensing has been set via any method other than the front toggle switch,

it will be

automatically disabled when the KD-Pro2x1X/4x1X is manually controlled by the front panel button, IR,

RS-232, TCP/IP, or USB control. If ﬁxed Auto Sensing is required, please set via the front toggle switch

IR Sensor

» Used to collect line-of-sight IR from remote control

» Receives signals from a 90° angle at up to 30ft away.

» Mount an IR emitter from Compass Control Pro or to control by another professional control system