User Manual

FRONT PANEL

Input Select button

» Used to choose which connected source is output to the connected display/device

» Selecting a source with the Input Select button or IR remote will disable Auto Sensing Mode IF Auto

Sensing has not been set via the front switch.

» To factory reset the unit, press and hold for approx. 10 seconds until the front LEDs blink twice

Output Active LED

» Blue LED illuminates solid when Hot Plug Detection (HPD) is received from the connected display/

output device

Service USB

» Micro USB port

» Used for conﬁguration and control from PC via KDMS Pro, KDMS, or third-party control terminal

» Used for ﬁrmware updates (consult with Key Digital tech support before updating ﬁrmware)

» Supports USB driver for Windows 10, 7, XP, Mac, Linux

» Will register as “Proliﬁc USB-to-Serial Comm Port in Device Manager

» Can be used as RS-232 control port. Baud rate is 57,600.