Owners manual

Connections, Buttons and LEDs

Rear Panel Connections:

All connections to the KD-MLV4x2Pro are found on the rear panel of the unit. Refer to the

illustrations below for port assignments while making connections:

HDMI Input Analog L/R Input VGA / DB15 Input

Input Connections are located on the left side of the back panel

› HDMI Inputs (4 total)

» Compliant with HDCP 2.2

» Maximum input resolution = 1080p@60fps

» Does not support CEC

» Supports 2ch and surround audio formats up to Dolby/DTS 5.1ch

» Active link (voltage + data) status with connected source can be viewed with RS-232 or

TCP/IP terminal

› VGA / DB15 Inputs (4 total)

» Supports either VGA or Component video signals

» Component Video input type must be speciﬁed via RS-232 or TCP-IP command, if desired

» Default analog video input type is VGA

» VGA / DB15 supported input resolutions: 640x480@60/75, 800x600@56/60/75,

1024x768@60/75, 1280x768@60/75, 1366x768@60/75, 1280x1024@60/75,

1440x900@60/75, 1600x900@60, 1600x1200@60, 1920x1080@60, 1920x1200@60

» Component / YPbPr supported input resolutions: 480i@30, 576i@25, 480p@60, 576@50,

720p@50/60, 1080i@25/30, 1080p@50/60

› Analog L/R Inputs (4 total)

» 3.5mm stereo connector

» Sampling frequency = 48KHz, 24Bits