Owners manual
21
-- SPO xx ON/OFF : Set Output xx ON or Set Output xx OFF --
-- SPOA ON/OFF : Set All Outputs ON or Set All Outputs OFF --
-- SPO xx DBG ON/OFF: Set Outputs xx Debug Mode ON/OFF --
-- SPOA DBG ON/OFF : Set Outputs xx Debug Mode ON/OFF --
-- SPO MV z : Set Outputs by z [1=Normal, 2=Mutliview Mode] --
-- --
-- Audio Output Setup Commands: ( xx=[01~02], [E=Enable, D=Disable] ) --
-- SPO xx SA yy : Set Output xx Audio by Input yy [yy=01~04] in M/V --
-- SPOA SA yy : Set All Output xx Audio by Input yy [yy=01~04] in M/V--
-- SPO xx HA E/D : Set HDMI Audio Output xx E/D --
-- SPOA HA E/D : Set All HDMI Audio Outputs E/D --
-- SPO xx DA E/D : Set External Digital PCM Output xx E/D --
-- SPOA DA E/D : Set All External Digital PCM Outputs E/D --
-- --
-- Multiview Mode Setup Command ( z=[1~9] ) --
-- [1=QUAD, 2=DOWN, 3=UP, 4=RIGHT, 5=LEFT, 6~9=MANUAL1~4] --
-- SPM VIS : Set Input Swap --
-- SPM VSS z : Save User Screen Mode to z, (z=[1~9]) --
-- SPM VSM z : Set Predeî‚żned Screen Mode z at 2K Multiview Mode --
-- --
-- Multiview Screen Manual Setup Command --
-- ( vv=[01~04], aaaa=[0000~1919], bbbb=[0000~1079] ) --
-- ( cccc=[0000~1919], dddd=[0000~1079], z=[0~9] ) --
-- SPM vv XY aaaa.bbbb.cccc.dddd : Set Start of X/Y-axis by aaaa/bbbb--
and End of X/Y-aixs by cccc/dddd on the Output Screen for Input vv--
-- SPM TY z : Set Transparency by z [0=00%, 1=25%, 2=50%, 3=75%] --
-- SPM BLW z : Set Border Line Width by z [0=None, 1~9Pixels] --
-- SPM BLC rrr.ggg.bbb : Set Border Line Color by RED/GREEN/BLUE --
-- ( rrr=[001~255], ggg=[001~255], bbb=[001~255] ) --
-- SPM PT abcd : Set Priority of Inputs by abcd [1234~4321] --
-- --
-- EDID Setup Command ( xx=[01~04], yy=[01~02], zz=[01-05] ) --
-- SPCEDID xx H yy : Copy EDID from Ouput yy to Input xx --
-- SPCEDIDA H yy : Copy EDID from Ouput yy to All Inputs --
-- SPCEDID xx D zz : Copy EDID from Default EDID zz to Input xx --
-- SPCEDIDA D zz : Copy EDID from Default EDID zz to All Inputs --
-- DEFAULT EDID 01 : HDMI Video 1080i@60, Audio 2CH PCM --
-- DEFAULT EDID 02 : HDMI Video 1080p@60, Audio 2CH PCM --
-- DEFAULT EDID 03 : DVI Video Max. 1280x720@60, No Audio --
-- DEFAULT EDID 04 : DVI Video Max. 1280x1024@60, No Audio --
-- DEFAULT EDID 05 : DVI Video Max. 1920x1080@60, No Audio --
-- --
-- System Control Setup Commands: --
-- SPCFB E/D : Set Front Panel Buttons E/D (E=Enable,D=Disable) --
-- SPCFD ON/OFF : Set Front LCD Backlight and LEDs ON/OFF --
-- SPCDF : Reset to Factory Defaults --
-- SPCDF00 : Reset to Factory Defaults Except of Network Setting --
-- --
-- Network Setup, ( xxx=[000-255], zzzz=[0001~9999] ) --
-- SPCETIPA xxx.xxx.xxx.xxx : Set Host IP Address to xxx.xxx.xxx.xxx --
-- SPCETIPM xxx.xxx.xxx.xxx : Set Net Mask to xxx.xxx.xxx.xxx --