Owners manual

16
Network Setup
A
B
D
C
After connecting to KD-MLV4x2Pro by using a 192.168.1.xxx type network or using a crossover
cable, you can adjust and view the unit’s TCP-IP settings using the Web Control Interface.
› A. Host IP Address is the IP address that you’d like to apply to the connected KD-MLV4x2Pro
unit.
› B. Subnet mask can be adjusted to accommodate your network’s subnet
› C. Router IP Address is the IP address of the network router, AKA the Default Gateway of the
network that the KD-MLV4x2Pro is/will be on
› D. TCP Port is set to 23 by default, however it is fully adjustable, up to 9999
192.168.1.1