Owners manual

The Advanced Video setup page enables creation of custom screen layouts and preset creation.

To create custom layouts in the Web Control Interface, the following tools are given:

› A. Window location and sizing control using 1080p (2K) Multi-view Mode Conﬁguration tool

» An X/Y axis is used, enabling control of each pixel of the 1920x1080 screen

X0 / X1 range = 0 - 1919

Y0 / Y1 range = 0 - 1079

= Desired location of Top-Left handle of window, from Left to Right horizontally

across the screen

= Desired location of Top-Left handle of window, from Top to Bottom vertically

across the screen

= Desired location of Bottom-Right handle of window, from Left to Right horizontally

across the screen

= Desired location of Bottom-Right handle of window, from Top to Bottom vertically

across the screen

› B. Image priority layering using Bring to Front (Layer Setting) tool

» Available layer settings are 1-4

» 1 = Top layer / front

» 4 = Bottom layer / back

› C. Save or Apply custom layouts to presets

» Use the drop down menu to choose the desired 1080p (2K) Multi-View Custom preset

» Press the

Apply button

if you wish to set the KD-MLV4x2Pro unit’s outputs to the selected

screen layout

» Press the

Save button

if you wish to write the entered values of the Advanced Video section

to the selected screen layout using the dropdown menu.

» 1. NOTE: Saving to “Preset Quad”, “Preset Down”, “Preset Up”, “Preset Right”, or

“Preset Left” will affect the unit’s default presets called on the front panel. To restore the

default presets, a factory default setting must be applied.

» 2. Use the Window Location and Sizing Control and Image Priority Layering tools

(A and B in the previous image, respectively) to conﬁgure desired screen layout, then

press the

Save button