Owners manual

Basic Video

The Basic Video setup page enables selection of the following:

› A. Entering Quad and Multi-View modes and choosing desired layout from default presets.

» Enter Multi-View mode affects both outputs and loses independence of each output.

» The default Multi-View presets are unit presets 1-5 which can be written over manually in the

Advanced Video setup screen, or by RS-232 or TCP/IP terminal

» To swap windows, press the Input Swap button on the bottom right of the screen and each

window will rotate counter-clockwise

› B. Independent matrix switching control for outputs 1 or 2

› C. Choosing user deﬁned manual presets 1-4, which are unit presets 6, 7, 8, and 9 respectively

and can be deﬁned and stored in the Advanced Video setup screen or by RS-232 or TCP/IP

› D. Input type (HDMI or VGA) for Inputs 1 and 2