Owners manual

12
Web Control Interface
The KD-MLV4x2Pro Web Control Interface provides basic and advanced setup and control
features for video, audio, and network.
To use the Web Control Interface, setup the KD-MLV4x2Pro on your Local Area Network by
connecting a network wire to the TCP-IP port located on the far-right of the back panel.
» The default TCP-IP address of the KD-MLV4x2Pro unit is 192.168.1.239
» The default port number is 23 .
You can connect to the KD-MLV4x2Pro unit on a 192.168.1.1 type router, or using a network
cable directly from your computer.
The TCP-IP address and port number of the KD-MLV4x2Pro unit can be adjusted to
accommodate your LAN’s setting. The settings are adjusted via Web Control Interface, RS-232,
or TCP/IP.
See the RS-232 and TCP-IP Commands and Protocol section for more information.
To enter the Web Control Interface, ensure that your computer is on the same network as
the KD-MLV4x2Pro or use a network cable with your computer’s network setting adjusted
to 192.168.1.xxx, open your web browser, and enter the IP address of the KD-MLV4x2Pro in
the web address cell.
192.168.1.239
KD-MLV4x2Pro
Admin Login Page
» Default password: admin
» Password may be changed in the Network Setup section of the Web Control Interface